Sand Plant Equipments


Molding Machine

Manufacturer of Jolt Squeeze Molding machine of BMD-300, BMD-450 & BMB-900

  • Sturdy construction
  • Short cycle time for high productivity
  • High dynamic squeeze pressure
  • Centralised auto-lubrication

Manufacturer of Jolt Squeeze Molding machines of different capacities.


The shakeout is exclusively used for separating moulding boxes and castings from sand and moulds.

The shakeout consists of a grid trough bolted to the main body.

stationary Shakeout

Oscillating conveyor Self discharge shakeout

Vibratory Feeders

It is used for conveying sand. It is equipped with the following features

  • Highly resistant and non-deforming with Jolter traverse
  • Maintenance free vibro motors
  • Hollow rubber cushioning springs

Belt Conveyors

The belt conveyors serve the purpose of transporting moulding sand for preparation of mould in a moulding machine.

It also helps to convey waste sand to waste sand storage yard & return sand to return sand storage hopper.

Bucket Elevators

Bucket elevator is a mechanism for hauling flowable bulk materials vertically.

It consists of:

  • Buckets to carry the material.
  • A belt to carry the buckets and transmit the pull.
  • Electrical drive to drive the belt.
  • The bucket elevators serve the sole purpose of transporting molding sand, to their respective storing areas.

Polygonal Sieve

The polygonal screen is intended to aerate and screen out return foundry sand.

Polygonal screen is used for separation of lumps and tramp metal from foundry moulding sand. It is very reliable and requires no maintainance.

Sand Soolers

It serve the cooling of hot foundry sand .Sand cooler consists of a vibrating conveyor made with an air bottom, a stationary exhaust hood , a moisturing unit, fan and a control unit.

The sand is cooled under optimum heat transfer conditions in the fluidized bed by evaporation of water. The final moisture level is adjusted by the precisely controlled addition of water according to the temperature and throughput.

Screw Conveyors

The screw feeder is used for feeding and metering additives such as bentonite, coal and dust binder. The additives can be metered volumetrically or gravimetrically. In the first case they are fed into the sand stream immediately prior to the mixer and the feeding can be monitored by flow meters. For more stringent dosing accuracy, feeding is performed via an additive weighing hopper.